01. The incineration bottom ash is transported to a water conveying conveyor of the apron type.
02. An abrasion resistant steel sheet is attached to the bottom of the conveyor to prevent wear.
03. The generated scum is effectively removed and stable operation is possible.
04. The ruggedly designed bearings are operated reliably under 24-hour operating conditions.
Fly ash facility
Fly ash facility
01. Fly ash is transported to the drag conveyor system.
02. An abrasion resistant steel sheet is attached to the bottom of the conveyor to prevent wear.
03. The conveyor is equipped with a heater and a thermal insulation function to protect the conveyor from the high temperature of fly ash and to increase the efficiency of transport.
04. The ruggedly designed bearings are operated reliably under 24-hour operating conditions.
Fly ash storage tank
Fly ash storage tank
01. Fly ash storage tank has an angle of repose to facilitate discharge of fly ash, and has a hopper heater, thermal insulation, vibrator, and aeration.
02. In order to prevent explosion by dust when discharging fly ash, a bag filter is installed at the top and a weighing pad for accumulating the discharged fly ash is installed.